Using digital modeling to simulate heritage furniture and manufacturing it digitally

Document Type : Original Article

Authors

1 Faculty of applied arts benha unnivesity

2 faculty of applied arts benha university

Abstract

With the passage of time, the problems of preserving the archaeological heritage are increasing, so scientists have begun to search for new, unconventional methods of simulation, reproduction, and preservation of it, and furniture is one of the most important examples included in cultural heritage.
In recent years, interest in digital manufacturing has increased, which depends mainly on the presence of computers, and many digital mechanisms have been deployed that serve design in general and interior design in particular, and from here the idea of research emerged that discusses the possibility of adopting design models that simulate heritage furniture through a computer, It is digitally produced and re-manufactured again. The research was conducted in three stages as follows:
First theoretical study in which an extensive theoretical study was conducted for scientific research and messages in the period from 2009 to 2019 within the constituent environments of the research elements, then a theoretical study of digital modeling was conducted as one of the axes of the research topic, then how to simulate the work of existing furniture, and also discuss simulation methods and choose the method Optimal among them, and finally discussing digital manufacturing and knowing the digital technologies used in manufacturing, so we finally get a set of mechanisms and tools that can be used in preparing a standard model for use in analytical study.
Second: An analytical study in which a number of samples were selected for pieces of historical furniture in which the method of digital modeling was applied to them taking into account the diversity of those samples in terms of the historical period between the ancient and classic Egyptian, and also in terms of function, then researching the possibility of digital manufacturing of those samples that have been Its model.
Third: The applied study and the results in which the researcher presents the most important results related to the effect of using digital modeling on simulating classic furniture and digitally recycling it.
key words :
Simulation - Modeling - Historic Furniture - Digital Manufacturing - 3D Printing

Keywords

Main Subjects

References

المراجع:
أولا المراجع العربیة
1- أمین إبراهیم عبدا لله، إبراهیم - الطباعة ثلاثیة الأبعاد - دکتوراه - تکنولوجیا تعلیم –کلیة التربیة جامعة الإسکندریة - 2016
Amine, Ebrahim Abbdaalah-altebaa tholaset alabbad-doctorah-technologya altalem- kolyt altrbbya-alexadrya- 2016
2- إسماعیل عواد، أحمد - رؤیة تصمیمیه معاصره للأثاث نحو إحیاء التراث المصری القدیم - مجلة العمارة والفنون
Esmel awd, Ahmed - roea tasmiya moaasea llasas naho ehyaa altoras almasry alkadem- mgalet aleara w alffnon- alkahira masr
3- وحید مصطفی، أحمد - مدخل فی التصمیم والمعرفة ج2- 2013 - ص2
wahid mostafa, ahmed - madkhal fi altasmim w al marefa -2013-p2
4- صلاح سعید عبد المجید، خالد - توثیق التراث العمرانی باستخدام تقنیات الواقع الافتراضی الفرص والتحدیات - مجلة کلیة الهندسة - جامعة الأزهر - العدد 11- 2016 - ص 290
salah saeid, khaled-twsik altoras alomrany bestekhdm teknyat alwakea aleftrady alfforas w alttahadyat -mglt kolyt alhndsa -gamat al azhar aladad 12-2016
5-  عبدا لستار، شیماء - تطبیقات الطباعة ثلاثیة الأبعاد فی مجال التصمیم الداخلی والأثاث - مجلة العمارة والفنون - العدد الخامس عشر ص 329
abdelstar, shayaa- ttbekat altebaa solasyt alabaad fe altasmim aldakhely w alasas - mglt alemaa w alfnon - aladad alkhmes ashr p 329
6- ولید الجلاد، محمد، (الأثاث) الموسوعة العربیة العالمیة، مؤسسة أعمال الموسوعة للنشر والتوزیع الطبعة الأولى 1996,المجلّد الأوّل، ص300
waleed alglad, mohamed - almwsoaa alalmya alrbya - moasset aamal aalmosoaa llnshrr w altwziea altba al ola-1996 -p300
7- ماهر، منار - دراسة تحلیلیه لتصمیم أقمشة الأثاث الملکى فی القرنین الثالث عشر الانجلیزی والفرنسی- رسالة دکتوراه غیر منشوره- کلیة الفنون التطبیقیة جامعة حلوان – 2010
maaher, manar- drasa taahlylya ltsmim akmshat alasas almalaky fi alkarnen alsales ashar alenglezy w alfrensy - doctora- alfnon altttbekya-helwan-2010
8-  موسی وآخرون - استخدام تراث التوثیق فی الحفاظ على التراث المعماری- المؤتمر الدولی الأول للتراث العمرانی فی الدول الاسلامیه - الهیئة العامة للسیاحة والآثار - الریاض 2010
Mosa wakharon- estekhdam toras altwsik fe alhefaz ala altoras almeary - almotamar alawal lltoras alomrany fe aldwl aleslamya -alhyaa alaama llsyaha w alasar - alryad 2010
 
ثانیا: المراجع الأجنبیة
9-   Discrete-Event System Simulation, Second Ed.By: Jerry Banks, John S. Carson, II and Barry L. Nelson. Published by: Prentice Hall, 1996
10-    "3D Scanning Advancements in Medical Science". Konica Minolta. Archived from the original on 2011-09-07. Retrieved 24 October 2011
11-     Lwamoto, L., digital fabrication: architecture and material techniques. Princeton architectural press, New York, 2009.
12-     Noha, M. S. (2011). Digital Architecture Theoretical Study of Digital Design Modeling. Alexandria University
ثالثا: مواقع الانترنت
13-              https://www.louvre.fr/en/recherche globale?f_search_cles=&f_search_univers=Collection%20%26%20Louvre%20Palace
14-              https://danchuck.artstation.com/projects/QeOax
15-              https://jaes.journals.ekb.eg 
16-              www.factum-arte.com 
17-              https://www.scientificamerican.com
18-              www.factum-arte.com 
19-              https://danchuck.artstation.com/projects/QeOax
20-         https://free3d.com/3d-model/louis-xv-chair-8936.html

Files

Share

How to cite

Statistics