The potential of Libyan clay in ceramic industries in two regions: Ashkeda - Tarout

Document Type : Original Article

Authors

1 PhD researcher

2 Professor, Ceramics Department, Faculty of Applied Arts, Helwan University

3 Helwan University

Abstract

This study was conducted to identify the extent of the possibility of using clays in southern Libya (north and south of the Ashkeda region, which were coded in the research (A1, B2), and the Tarout region symbolized (C3), for various industrial ceramic uses, through the identification of the physical and chemical properties where it was conducted Laboratory tests (plasticity modulus analysis, water additive analysis of the used slurries, granular gradient analysis using laser, XRF LAB chemical analysis, TDA, DTA, X-ray analysis X-RAY, XRD), to identify the specifications of the clays used. Clays at different temperatures (950 ° C, 1000 ° C, 1050 ° C, 1100 ° C, 1150 ° C) to identify the appropriate degree of maturity by measuring the degree of (density, porosity and water absorption, total shrinkage, color gamut) by reaching the highest density ratio, the lowest porosity, absorption and the highest hardness strength .
It is evident through the laboratory tests and analyzes that were conducted for the three clays (A1, B2, C3), which showed that the regions of southern Libya had a variety of deposition environments, and thus the diversity of the mineral deposits present in them, which resulted in the difference in the type of clays obtained, which is that of the Tarout region (Kaolin type) It is considered one of the remaining primary clays (primary / residual), meaning that it was formed and settled in its original place, and it is due to the type of WSCH according to the Libyan specifications. It is classified from clays with medium thermal resistance and the temperature does not exceed (1400 ° C) and according to the optical parameter it is white in color) Tine of the Ashkeda region (a type of earth mud, which is mostly sedimentary mudflats formed in different geological eras, so that it became easy to classify it according to the geological components, and it is a non-thermal clay located between the thermal limits of (950 CO – 1000 CO).

Keywords

Main Subjects

References

المراجع
المراجع العربية:
1. عبيد، إبراهيم عبد السلام، صلاح الدين التريکي، " المواد الخام وأماکن تواجدها بالجماهيرية العظمى" ، مرکز البحوث الصناعية ، 2000.ص25 .
1.Obaid, Ibrahim Abdel-Salam, Salah El-Din Triki, “el mawad el khaam wa amaken tawagedaha begamahereya el ozma”, marakez el behoth el senaiya, 2000.p25
2. جرد، حسام صباح ، استخدام طينة الکاؤولين الحمراء لإنتاج خزف واطئ الحرارة، العراق، مجلة جامعة بابل ،العدد 5 ، 2014 ، ص 1122.
2.Gard , Hussam Sabah, " estekhadam tena el kaolen el hamra leantag khazaf wate el harara" , Iraq, magalet gameat Babel , el adad 5,2014,p 1122
3. عباس ،علي خالد ، إمکانية استخدام الخامات المحلية في العراق لإنتاج بلاطات خزفية باستخدام التکنولوجيا الحديثة،إطروحة دکتوراه , جامعة حلون ، کلية الفنون التطبيقية ، قسم الخزف ، 2017،ص 40.
3. Abbas, Ali Khaled,'emkaneyat estekadam el khamat el mahalleya fe el Iraq lientag balatat khazafeya bestekadam el takanologya el hadetha",etarou7a doktorah , gameat helwan, kollyat el fanoun el tatbekeya, kesem el khazaf, 2017.p40
4. عثمان ، فتحي عبد الوهاب ، الأسلوب الفني وارتباطه بمواصفات البلاطات الخزفية ، رسالة ماجستير بکلية الفنون التطبيقية ، جامعة حلوان ، قسم الخزف ، 1999، ص 16.
4.Othman, Fathi Abdel-Wahab, "el eslop el fane wa ertebateh bemowasafat el balatat el khazafeya", resalet magaster bekolleyat el fanon el tatbekeya , gameat helwan, kism el khazaf,1999,p16.
5. درويش ، فاطمة محمد عبد المنعم ، دراسة أجسام شبه متزججة من خامات محلية وتطبيقها في منتجات الخزف، رسالة ماجستير  بکلية الفنون التطبيقية ، جامعة حلوان ، قسم الخزف ،  ص52 .
5. Darwish, Fatima Mohamed Abdel Moneim , deraset agasam shebah motazgega men khamat mahaliya wa tatbekatha fe montagat el khazaf , resalt magester  bekoleyat el fonoun el tatbekaya , gameat helwan , kesem el khazaf , p 52
6. الشيباني ، مفتاح ، وآخرون "تکنولوجيا السيراميک المواد الخام" ، مکتبة طرابلس العلمية العالمية ،1996،ط1،ص 111، 113، 119، 122، 134.
6. Shaibani, Miftah, and et al, "tekanologeya el ceramic el mawad el kham", makatabet Tripoli el almeya el alameya, 1996, tabaa 1, pp. 111,113,119,122,134
7. الشيباني ، مفتاح ، محمد الحداد ، "التشکيل الخزفي" ، المرکز الوطني لتخطيط التعليم والتدريب ، ليبيا ، الطبعة الأولى ،ص59 .
7.Al-Shaybani, Miftah, Muhammad Al-Haddad, "el tashakel el khazafe ", el marakez el watane letakhatet el taelem wa el tadareb, Libya, tabaa 1, pp 59 .
 
المراجع الاجنبية:
8. T. Manfredini, M.Hanuskova, Natural raw materials in "traditional "ceramic manufacturing,journal of the university of chemical and metallurgy, 47,Italy,2012,p 465 .

Files

Share

How to cite

Statistics