Effect of Electromagnetic Waves on the Design of Industrial Design Products in View of Science Technologies of Remote Sensing

Document Type : Original Article

Author

Doctorate of Philosophy Degree in Applied Arts - Industrial Design Specialization Lecturer in industrial design department - Faculty of Applied Arts – Benha University Arab Republic of Egypt

Abstract

The design of equipment and apparatuses throughout the development of technology in continuous and sustainable development, in view of what is happening in the scientific arena of advanced discoveries require designers to employ them in new creations and innovations, appear in the form of adding value to those products, there is no doubt that the frequencies of the different waves of the electromagnetic chain have been applied over the past decades in many applications and most important systems of telecommunications and remote sensing, and appeared radio wave applications in the design of radio apparatuses and various communication systems, based on the properties of the visible and invisible waves of the electromagnetic wave series, It has been activated in the conclusion of information and discoveries on the surface of the earth and its construction and resources, such as raw materials and agricultural areas, using the aerial survey or satellites, and this showed the characteristics of different frequencies in sensing and detection with images by specific indications, or through indications of digital techniques which can be used in conclusion  what is being research.
 
Therefore, the development of industrial design products by adding value with functions and smart systems requires activation of electromagnetic waves of sensing and remote control, these techniques need to reinforcement the relationship between the designer and the characteristics of the different waves in the electromagnetic chain, and in safe frameworks that do not harm by human health and achieve new functional purposes aims to upgrade the functional systems to the level of control as the human mind in the design of machines and engineering equipment's.   

Keywords


1-   Barton, D. & S. Leonov (Eds.). Radar technology encyclopedia. Norwood, MA, USA. 511 p. Artec House. (1997). 
2-   Campbell, J.B. Introduction to Remote Sensing. New York. The Guilford Press. (1987).
3-   Canada Centre for Remote Sensing. Fundamentals of Remote Sensing. CANADA. Natural Resources Canada. (2000). 
4-   Lillesand, T. M. and kiefer, R.W. Remote Sensing and Image Interpretation. New York. John Wiley and Sons Inc. (1994). 
5-   Venikov V.A. (Prof.). Introduction to Energy Technology. Moscow. Mir Publishers. (1981). 
6-   Werle D. Radar Remote Sensing – A Training Manual. Ottawa, Canada. 193p, 75, Dendron Resource Surveys Ltd. (1988 and 1992).
7-    William H. Engineering Electromagnetic. Tokyo. Kosaido Printing. (1981).
8-   Yoshio Wased, Eiichiro Matsubra, Kozoshinoda. X- Ray Diffraction Crystallography – Introduction, Examples and Solved Problems. London New York. Tohoku University, Institute of Multidisciplinary Research for Advanced Materials, Springer Heidelberg Dordrecht. (2011).  
Internet Sites :
16-    www.en.wikipedia.org/wiki/Radar,May11,2018
18-    https://www.researchgate.net/profile/Udochukwu_Akuru/publication/237072015_Electromagnetic_Wave_Effect_on_Human_Health_Challenges_for_Developing_Countries/links/56a668d008ae4757f4a2febe/Electromagnetic-Wave-Effect-on-Human-Health,May11,2018