Guidance Designer to selection the suitable process treatment and finishing metal product surface

Document Type : Original Article

Authors

1 - Faculty of Applied Arts -Benha University

2 Faculty of Applied Arts, Helwan University

Abstract

Abstract
Over the last few decades many methods of treatment and coating have been developed and used to reduce friction and to protect surfaces from damage, especially in metal products.
Scientists have become aware that the surface is the most important part of many engineering products, and most of the usability problems have to do with surface characteristics.
Many functionally important properties depend on surface treatment, such as corrosion protection and functional, aesthetic and environment-friendly properties.
It is therefore very clear that the process of selecting suitable coatings or surface treatment requires a clear and specific methodology. This process should be carried out at an early stage of product development. It is essential that developers consider the surface requirements during the initial stages of ideas immediately after Meet the requirements of users and market.
The problem of the research is the need for precise systems to choose the surface treatment of metal products to meet the needs of the user will be easier and faster in the application and less expensive in production and environmentally friendly and result in the surfaces are compatible functionally.
- The objective of the research is to develop a scientific methodology for the selection of surface treatment of metal products through an analytical study of the most important methods used and know the most important advantages and disadvantages and determine how the designer chooses the appropriate way to the materials of the product and its function.

This will be done by the assumption that determining the appropriate way to end the surface of the product reduces many of the problems that can be experienced by the product later. And achieved a great deal of technical, functionally and economic consensus.

Keywords

References

المراجع
1-   إبراهیم، فکرى جمال. أبو المجد، عبد النبی. إبراهیم، شریف محمد
"اسهامات علم الصحة الصناعیة فی علم الارجونومیکس المهنی" مجلة العمارة والفنون والعلوم الإنسانیة العدد 18
Ebrahim, Fekry Gamal. Abo El magd, Abd El nabi. Ebrahim, Shrif Mohamed “eshamat elm el seha el senaeya fe elm el argonomex el mehani” Magalet al Emara w al Fenoun w al Elom al Insania El adad 18
2-   الهیبرى، رحاب. حامد، أمانی وحید سلیم "تأثیر نظریة الذکاءات المتعددة فی تحدید القدرات الذهنیة لدى الفرد من منظور تصمیم المنتجات" مجلة العمارة والفنون والعلوم الإنسانیة العدد 16
El Hebery, Rehab. Hamed, Amani Wahid Sleem: taaseer nazaryt el zakat el motadeda fe tahdid el qodrat el zehnya leda el fard mn manzor tasmeem el montagat” Magalet al Emara w al Fenoun w al Elom al Insania El adad 16
REFERENCES
1-W. Tillmann, E. Vogli, -Selecting Surface-treatment Technologies-Germany-WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim-2006- pp. 6 - 8
2- Y. Fu, J. Wei, A. W. Batchelor, Some considerations on the mitigation of fretting damage by the application of surface-modification technologies, Journal of Materials Processing Technology 99 (2000) 231-245.
3- Sagar Amin1-Hemant Panchal-A Review on Thermal Spray Coating Processes-International Journal of Current Trends in Engineering & Research (IJCTER)- Volume 2 Issue 4-April 2016 pp. 556 – 563
4- Dr. Robert C. Tucker, Jr.- Considerations in the Selection of Coating-Florida- ADVANCED MATERIALS & PROCESSES- MARCH 2004- pp. 25 – 28
5-http://www.twi.co.uk/technical-knowledge/faqs/process-faqs/faq-what-are-the-advantages-of-plasma-spraying/13/7/2019
6- Dr. Feng Shi -Ceramic Coatings – Applications in Engineering- Croatia- Janeza Trdine 9, 51000 Rijeka- 2012- pp. 261 – 264
7- Arthur A. Tracton-COATINGS MATERIALS AND SURFACE COATINGS- United States of America- Taylor & Francis Group, LLC -2007- pp. (51-1) – (51- 4)
8- Dabing LUO - SELECTION OF COATINGS FOR TRIBOLOGICAL APPLICATIONS- Master Université Jiaotong du Sud-Ouest - Chine- 2009. - pp. 5,6,7 – 38
9-Dhiflaoui, H.; Jaber, N.B.; Lazar, F.S.; Faure, J.; Larbi, A.B.C.; Benhayoune, H. Effect of annealing temperature on the structural and mechanical properties of coatings prepared by electrophoretic deposition of TiO2 nanoparticles. Thin Solid Film. 2017- pp. 638, 201–212.
10-Behzad Fotovvati1-Navid Namdari2 and Amir Dehghanghadikolaei 3-Review On Coating Techniques for Surface Protection- Manuf. Mater. Process. 2019- pp. 3-6
11-http://www.dot.ca.gov/hq/oppd/pavement/qpavement.htm.15/7/2019

Files

Share

How to cite

Statistics