Effect of different cotton material on the yarn produced by the ring spinning

Document Type : Original Article

Author

spinning ,weaving Dep. Faculty of Applied Arts , Damietta University

Abstract

The ring spinning is the end of the stages of the cotton yarn spinning by traditional methods Before Yarn winding Process, and is characterized by being one of the best methods used to produce thin yarns with high durability of short fibers, it can also produce cotton yarns from No. 4 to No. 240 E, and due to the multiplicity Types of cotton material, and multiple sources, the research was conducted to unclear the impact of the use of different types of cotton on the quality of yarns produced by The ring spinning of yarn, and this study was conducted with the aim of the possibility of producing cotton yarns with different materials and types with different number ring spinning system with better properties in functional performance In the production of (12) samples of cotton yarn with (4) different cotton materials (Giza 86, Giza 90, Greek cotton, Burkina cotton),and (3) cotton yarns of different number (16/1, 20/1, 24/1), and conducted various tests (RKM, elongation, Naps, thick places, thin places and the percentage of irregularities on the yarns to illustrate the effect of using different types of cotton material on the yarns produced in the study, and the results after statistical analysis showed a clear difference in many tests, which shows the obvious effect of the research variables on the produced yarns, and the importance of research in determining the best Types of cotton material used in the production Yarns of different numbers, which are produced by ring spinning system, reflected on job performance, and the results were within RKM values for Giza 86 cotton reached the highest, while it came for the lowest Burkina cotton material, The elongation values for the highest Greek cotton, while the elongation values For the lower Burkina cotton material, The values of Naps of the highest Burkina cotton material, while the value of the cotton material came Giza 86 least, Values came in the thickest places of the highest Burkina cotton material, while the values of the cotton material Giza 90 were lowest , The values of the thin places of the highest Greek cotton material, while the value of the thin places of the lowest the cotton came to Giza 86, and Giza 90, , The percentage of irregularity of the highest Burkina cotton material was achieved, while the cotton material came to Giza 86 the least.

Keywords

Main Subjects


المراجع:
 الرسائل العلمیة:
1- احمد وجیه، منى، تأثیر اختلاف بعض الأسالیب التطبیقیة لإنتاج الخیوط على کل من الخواص الوظیفیة والجمالیة لأقمشة الملابس الصیفیة، رسالة دکتوراه، کلیة الفنون التطبیقیة، جامعة حلوان، 2009م.
1- 'ahmad wajih, munaa, tathir aikhtilaf bed al'asalib altatbiqiat li'iintaj alkhuyut ealaa kl man alkhawwas alwazifiat waljamaliat li'aqmshat almalabis alsayfiat, risalat dukturah, kuliyat alfunun altatbiqiat, jamieat hilwan, 2009.
2- عبد القوى، ایمان یحیى، دراسة العوامل التى تؤثر على خاصیة التشعیر لتحسین جودة بعض الخیوط القطنیة المنتجة بأسالیب غزل مختلفة، رسالة ماجستیر، کلیة الفنون التطبیقیة، جامعة حلوان، 2008.
1-      Abd elkawee, eman yhya, dirasat aleawamil alta tuathir ealaa khasiat altasheir litahsin jawdat bed alkhuyut alqataniat almuntijat bi'asalib ghazal mukhtalifat, risalat dukturah, kuliyat alfunun altatbiqiat, jamieatan hulwan, 2008.
2-      الجمل، فیروز أبو الفتوح. حارس، فتحی صبحی. عبد السلام، مریم حسن " تأثیر بعض التراکیب البنائیة لجاکارد تریکو اللحمة على بعض الخواص الوظیفیة لأقمشة الملابس الخارجیة" مجلة العمارة والفنون والعلوم الانسانیة العدد8.
3- aljamlu, fyruz 'abwalftuh. haris, fthy sbhy. eabdalsalam, murym hasan " tathyr bed altrakyb albnayyt ljakard trykw alluhmat ealaa bed alkhawwas alwazyfyt li'aqmshat almalabis alkharjy" majalat aleamarat walfunun waleulum al'iinsaniat aledd8
3-     محمود، طارق أحمد " تأثیر استخدام اللیزر الغازى على الخواص الطبیعیة والمیکانیکیة لبعض الأقمشة القطنیة والبولی استر" مجلة العمارة والفنون والعلوم الانسانیة العدد10 الجزء 1
4-mahmud, tariq 'ahmad " tathyr aistikhdam alllyzir alghazaa ealaa alkhuwwas altbyeyt walmykanykyt libaed al'aqmishat alqataniat walbulii astr" majalat aleamarat walfunun waleulum al'iinsaniat aledd10 aljuz' 1
الکتب العلمیة:
3- عبد السلام، محمد السید، نجم، محمد عبد الرحمن، القطن المصری صعوبات الحاضر وطموحات المستقبل، مطبعة مودرن، الاسکندریة، 2009م.
3- eabd alsalam, muhamad alsyd, najam, muhamad eabd alrahmin, alqatn almisri sueubat alhadir watumuhat almustaqbal, mutabaeat mudrin, al’iiskandariat, 2009.
4- ابراهیم عبده الهوارى، صلاح الدین صابر، تکنولوجیا غزل القطن، صندوق دعم صناعة الغزل والمنسوجات، 2004
4- Abdo elhawary ibraheem, Saber salah eldeen, tiknulujia ghazal alqatan, sunduq daem sinaeat alghazl walmansujat ,2004.
5- الطنطاوى، سمیر احمد، نظم انتاج الخیوط، مطبعة الشهابى، 2005.
5- Eltantawy, Samir ahmad, nazam 'iintaj alkhuyut, mutbaeat alshahaba, 2005.
6- Lawrence C.A, Advances of yarn spinning Technology, Woodhead Publishing series in Textile, 2010.
7-  Tasnim N. Shaikh & Prof. Someshwar S. Bhattacharya, Engineering Techniques of Ring Spinning, Woodhead Publishing India in Textiles,2015.
8- , B. Purushothama, Hand book on Cotton spinning industry, Publishing India in textile, 2015.
9- Gordon, S., Hsieh, Y-L, Cotton Science and Technology, Wood head publishing limited, 2007.
10- Schwartz, P., Structure and Mechanics of Textile fiber assemblies, the textile institute, Wood head publishing limited, England, 2008.
 
المقالات من دوریات:
11- W. Klein, “Technology of Short Staple Spinning”, The Textile Institute, Manual of Textile Technology,2015.
12- Altas, S., Kadoglu, H., Comparison of Conventional Ring, mechanical Compact and Pneumatic Compact yarn spinning systems, Journal of engineered fibers and fabrics, Vol 7, 2012.
13- Elsayed, M., A., Sanad, S., H., The impact of new spinning technologies on the Egyptian cotton, Autex Research Journal, Vol 8, 2007.
المواصفات القیاسیة:
14- ASTM D2256 / D2256M, 10(2015), Standard Test Method for Tensile Properties of Yarns by the Single-Strand Method.
15- ASTM D1425 (2012), Standard Test Method for Test Properties of Regularity of yarns.