Interior design of interactive exhibitions according to Folding Architecture concept

Document Type : Original Article

Authors

1 FACULTY OF APPLIED ARTS BENHA UNIVERSITY

2 Professor at the Applied Arts Faculty - Department of Interior Design - Helwan University.

Abstract

Exhibitions are considered one of the forms of architectural projects with a huge space, it must have a specific design program standards, but those standards on which the interior design of the exhibitions are based have not been developed from the past, the interior design of each exhibition is related to Functional spaces and their relationship to the movement paths. This research is a try to develop some standards related to the interior design of interactive exhibitions from the perspective of one of the modern trends in architectural design, which is folding architecture. Folding techniques have been used widely in the interior design and furniture in recent years to reach functional and creative solutions in the interior spaces.
Research problem:
Is that the traditional standards of exhibitions interior design are not keeping pace with modern technological and design trends.
Research Objectives and Importance:
- Analyzing the methods of folded architecture, identifying its mechanisms, and trying to devise some methodological standards from it, which can be applied to the interior design of interactive exhibitions.
- Introducing a new approach for interior design for interactive exhibits from the folded architecture perspective
Research Methodology:
Interior design for fixed and mobile interactive exhibitions
Research hypothesis:
Devising standards that keep pace with modern trends in exhibition design, leads to introducing new and varied functional solutions that achieve ideal performance.
Research methodology:
Descriptive and analytical approach to reach the research goal.
From the analytical and applied study, we conclude the following:
The mechanisms used in the design process of the interactive exhibition pavilions varied, which depend on folding technology, whether these elements are used directly or indirectly.
From the study and analysis of the study samples, it was found that the most common materials used in the folding process are aluminum strips, followed by reinforced cardboard.

Keywords

Main Subjects

References

لمراجع 
1-   برکات ، إسراء حسني واخرين : أثر استخدام التصمیم الداخلي التفاعلي علي قاعة متعددة الأغراض بالمرکز الثقافي – المؤتمر الدولي الرابع لکلية الفنون التطبيقية - فبراير 2016 – ص 4
'iisra' husni barakat - 'athar aistikhdam altasmim alddakhilii altafaeulii ealaa qaeat mutaeadidat al'aghrad bialmarkaz althaqafii - almutamar alduwaliu alrrabie likaliat alfunun altatbiqit jamieat hilwan -2016
2-   حمزاوي ، مروة محمد واخرون - تأثير التصميم التفاعلي على الفکر المعماري لزجاج العمارة المعاصرة - مجلة التراث والتصميم – المجلد الأول – العدد الثالث يونيو -2021
Hamzawy,Marwa mohammmed- "Taaasr altasmim altfaoolyy ala aalfkr almemaary  leezzogagalemara almoasera" meegalet altoraas w alasmem -aladaad alsalees -2021
3-   سمير ، علا محمد " أثر استخدام النسيج الذکى فى تطوير التصميم الداخلى التفاعلى " – مؤتمر کلية الفنون التطبيقية – جامعة حلوان – 2008 م.
-ola mohameed seamier"asar estehda alnasig alzaki fi tatwerr altasmim aldaheel alfaoly- motamar kolyt alfnon alttbbekia – gameat Helwan- 2008
4-    عبد الرحمن  ، سعيد حسن واخرون - التکنولوجيا التفاعلية وتأثيرها على التصميم الداخلي في البنوک الذکية - مجلة التراث والتصميم – المجلد الأول – العدد الثانى -ابريل 2021
Saeed Hasan Abdelrahman – altechnologia altfaolia wtaserha ala alasmim aldahely fi albok azakia – mglt altoras w alasmim- almogalad alawl -aladad  alsany – 2021
5-   عزالدين ، وسام ممدوح - الاثاث التفاعلى بين الثورة الرقمية ومتطلبات العصر- رسالة ماجستير – الفنون التطبيقيه – جامعة دمياط 2015
Wessam ezzeldin – alasas altfaoly ben alswra alrakamia w mottlat alasr- resale magstir – kolys alfnon alttbikya gameaat domyat - 2015
6-  Abbas Ali Hamza Al –Kraza The Origami Strategy in Architecture - Iraqi Journal of Architecture and Planning, Vol. 19(2020), Issue 2, Pages 18-38
7-  Diaaelden Tantawy, “Origamic Architectural Form Design System”  International Journal of Sciences: Basic and Applied Research (IJSBAR) (2015) Volume 21, No 2, pp 66-86
8-  Filipa Osório, .(2018). Alexandra Paio, Sancho Oliveira" Kinetic Origami Surfaces From Simulation to Fabrication" Istanbul Technical University(P-21-34-56-44
9-  Hani Buri- ORIGAMI – Folded Plate Structures, Architecture – PHD - Laboratory for timber constructions IBOIS, - Ecole Polytechnique Fédérale Lausanne, EPFL- Lausanne, Switzerland-2019 p3
10- Katherine A. Liapi, ( 2002 ) “Transformable Architecture Inspired by the  Origami Art" University
11- Nenad Šekularac- FOLDED STRUCTURES IN MODERN ARCHITECTURE -Architecture and Civil Engineering Vol. 10, No 1, 2012, pp. 1 – 16
12- Stephen Bitgood - Suggested Guidelines for Designing Interactive Exhibits -VISITOR BEHAVIORS- Volume VI- Number 4 Page4
13-  Tao Shen, Yukari Nagai-  An Overview of Folding Techniques in Architecture Design-  World Journal of Engineering and Technology, 2017, 5, 12-19 – p  15
14- https://www.indissoluble.com/project/interactive-showroom-indissoluble-barcelona/
15- https://www.indissoluble.com/project/stand-design-ebace-indissoluble-geneva-switzerland/
16- https://www.indissoluble.com/project/interactive-stand-telefonica-mwc-2019/
17-  https://www.indissoluble.com/project/stand-design-indissoluble-barcelona
18- https://www.indissoluble.com/project/interactive-exhibition-design-indissoluble-barcelona/
19- https://www.indissoluble.com/project/caixanova-permanent-exhibition-vigo/
20- https://www.indissoluble.com/project/repsol-stand-wpc-inmersive-videomapping/
21- https://www.engineersgarage.com/article_page/sensors-different-types-of-sensors/
 
 

Files

Share

How to cite

Statistics